Zenith DVB251 warranty Troubleshooting, Symptom Cause Correction

Page 24

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom

Cause

Correction

 

 

 

No power.

The power cord is disconnected.

Plug the power cord into the wall outlet

 

 

securely.

 

 

 

The power is on, but

No disc is inserted.

Insert a disc. (Check that the DVD or,

the DVD player does

 

audio CD indicator in the display

not work.

 

window is lit.)

 

 

 

No picture.

The TV is not set to receive DVD signal

Select the appropriate video input mode

 

output.

on the TV so the picture from the DVD

 

 

player appears on the TV screen.

 

 

 

 

The video cable is not connected

Connect the video cable into the jacks

 

securely.

securely.

 

 

 

 

The connected TV power is turned off.

Turn on the TV.

 

 

 

No sound.

The equipment connected with the

Select the correct input mode on the

 

audio cable is not set to receive DVD

audio receiver so you can listen to the

 

signal output.

sound from the DVD player.

 

 

 

 

The audio cables are not connected

Connect the audio cable into the jacks

 

securely.

securely.

 

 

 

 

The power of the equipment connected

Turn on the equipment connected with

 

with the audio cable is turned off.

the audio cable.

 

 

 

 

The Digital Audio Output is set to the

Set the Digital Audio Output to the

 

wrong position.

correct position, then turn on the DVD

 

 

player again by pressing POWER.

 

 

 

The playback picture is

The disc is dirty.

Clean the disc.

poor.

 

 

 

 

 

The DVD player does

No disc is inserted.

Insert a disc. (Check that the DVD, or

not start playback.

 

audio CD indicator in the DVD display is

 

 

lit.)

 

An unplayable disc is inserted.

Insert a playable disc. (Check the disc

 

 

type, color system and Regional code.)

 

 

 

 

The disc is placed upside down.

Place the disc with the playback side

 

 

down.

 

 

 

 

The disc is not placed within the guide.

Place the disc on the disc tray correctly

 

 

inside the guide.

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

The Rating level is set.

Cancel the Rating function or change

 

 

the rating level.

 

 

 

The remote control

The remote control is not pointed at the

Point the remote control at the remote

does not work properly.

remote sensor of the DVD player.

sensor of the DVD player.

 

The remote control is too far from the

Operate the remote control within about

 

DVD player.

23 ft (7 m).

 

There is an obstacle in the path of the

Remove the obstacle.

 

remote control and the DVD player.

 

 

The batteries in the remote control are

Replace the batteries with new ones.

 

exhausted.

 

 

 

 

24

Image 24
Contents Installation and Operating Guide Warranty Safety Precautions Otes on copyrightsRegulatory Information FCC Part Important Safety Instructions Table of Contents Before Use Playable DiscsDisc-related terms Precautions About SymbolsFront Panel and Display Window Disc TrayReverse SKIP/SCAN Q / S Forward SKIP/SCAN T / RRemote Control Remote Control Operation RangeRemote control battery installation AC Power Cord Video Output SwitchRear Connections Panel Coaxial Digital audio out jackConnecting to a TV ConnectionsVideo connection Good Video connection BetterConnections Connecting to Optional Equipment Digital Multi-channel soundOUT jack Coaxial X to the corresponding in jack Rear of DVD playerBefore Operation General Explanation On-Screen DisplayOn-screen display operation Before Operation Initial Settings Initial Settings General OperationLanguage PictureBefore Operation SoundOthers Parental Control Rating DVDCountry Code DVD Changing the 4-digit codeOperation with DVD and Audio CD Playing a DVD and Audio CD Exchanging discs during playbackSkipping discs Exchanging the disc and starting playbackOperation with DVD and Audio CD General Features Repeat DVD CD Repeat A-B DVD CDTime Search 3D SurroundSpecial DVD Features DVD Programmed Playback with Audio CD Programmed Playback with Audio CDOperation with MP3 Disc Playing an MP3 disc Pause MP3Moving to another Track MP3 Repeat Track/All/Off MP3Programmed Playback with MP3 Disc To resume normal playback from programmed playbackVideo Mode Setting DVD Additional InformationScreen Saver Troubleshooting Symptom Cause CorrectionLanguage Code List Code LanguageCountry Code List Code CountrySpecifications AccessoriesGeneral SystemThis Limited Warranty does not Apply to