When the information is correct and the time reaches the minute you set in Step 7, press MENU twice. The currently set time appears and the clock starts running.
Note: Seconds begin counting from 00 when you press MENU twice.
Turning On Auto Clock Set
If you turned off the auto clock set feature and manually set the VCR’s clock, then find that EDS is available in your area, you can turn the auto clock set feature back on. This ensures that the VCR sets itself to the correct time after a power failure of less than 24 hours.
Follow these steps to turn on auto clock set.
1.Press MENU to display the main menu.
2.Repeatedly press PLAY or STOP to high- light SET CLOCK, then press
3.Repeatedly press PLAY or STOP to high- light AUTO SET, then press
K
ET
Y
4.Press CH s. The VCR searches for an EDS signal and, if it finds one, automatically sets its clock to the correct time. If the VCR does not find an EDS signal, follow the steps under “Manually Setting the Clock” on Page 16.
Adding/Erasing Channels
We recommend you check the channels the VCR automatically stored. It might have stored distant, weak channels that you normally would not watch, or it might have missed channels you want to store.
If the tuner stores a channel that you do not want, repeatedly press (or press and hold) CH s or CH t to tune to that channel, then press ADD/DLT. CHANNEL nn DELETED appears, and the unwanted channel is erased from the tuner’s memory.
CHANNEL 08 DELE TED
If you want to program a weak channel that au- tomatic programming missed, enter the desired channel number using the remote control’s number buttons. Then press ADD/DLT. CHAN- NEL nn ADDED appears, and the channel is added to memory.
CHANNEL 08 ADDED
Reprogramming Tuner Memory
You might want to reprogram the VCR’s tuner memory if you move or change from an anten- na connection to a cable TV connection.
Note: You can also quickly erase all settings, including the time, local channels, and pro- grammed events, then reprogram the tuner’s memory. See “Resetting the VCR’s Memory” on Page 18.
Follow these steps to reprogram the tuner.
1.Press MENU to display the main menu.
Note: To exit the programming mode dur- ing Steps
17