Radio Shack 112 (16-549), 62 (16-632), 113 (16-550) owner manual Setting a Timer, 200P

Setting a Timer

Note: If you use a TV/monitor that is connected to the VCR’s AUDIO/VIDEO OUT jacks, set the TV/monitor to the video mode and skip Steps 2 and 3.

1.Turn on the VCR and the TV.

2.Set the TV to the same channel as 3-CH-4on the back of the VCR.

3.Repeatedly press TV/VCR until VCR appears.

4.(Model 62 only) Set the audio recording mode to the desired setting. See “Receiv- ing/Recording Stereo/SAP Broadcasts (Model 62 Only)” on Page 28.

5.Load a blank cassette, or one that you want to record over, into the VCR.

6.Press PROG on the remote control. The timer setting menu appears on the TV screen.

STOP CH

2:00P 125

SLP

TE

Y

Or, if you have already entered timer set- tings, the current settings for up to the first four broadcasts appear.

STOP CH SPD

2 : 00A 08 SP

Note: If the clock is not set, PLEASE SET CLOCK BEFORE PROGRAMMING ap- pears, then the clock setting screen ap- pears. Set the clock as described in “Manu- ally Setting the Clock” on Page 16.

30

7.Repeatedly press PLAY or STOP to select an empty timer number, then press FAST-F. This menu appears.

DATE START STOP CH

8 SAT --:-- --:-- --

8.Repeatedly press PLAY or STOP to select the date when you want to record.

To record a broadcast at the same time on the same day every week, press either but- ton until WEEKLY flashes and the desired day of the week appears.

To record a broadcast at the same time Monday through Friday, press either button until DAILY flashes and MON-FRIappears.

To record a broadcast at a set time today, press either button until today’s date flashes and TODAY appears.