2.Turn on the VCR and repeatedly press TV/ VCR until VCR appears.
3.Press PROG. The first four timer settings appear.
STOP CH SPD
2 : 00A 08 SP
4.Repeatedly press PLAY or STOP to select the setting you want to change, then press
5.Follow Steps
6.When you finish, press PROG again, then turn off the VCR.
Clearing a Timer
If the timer recording has not yet started:
1.Follow Steps
2.Highlight the setting you want to clear, then press ADD/DLT.
3.When you finish clearing the timer, press
PROG.
Turn off the VCR if you still have at least one timer setting entered.
If a timer recording is in progress:
1.Press POWER to stop timer recording. TO
CANCEL TIMER REC PUSH POWER THEN STOP KEY appears if you are watching the signal from the VCR.
2.Within 10 seconds, press STOP. TIMER disappears.
32
DUBBING
The process of recording from one audio/video device to another is called dubbing.
An audio/video device where a signal origi- nates is called the dubbing source. You can use another VCR, camcorder, satellite receiv- er, or other device with A/V outputs as the dub- bing source, connect the dubbing source and the VCR, then use your VCR to record the sig- nal from the dubbing source.
Or, you can use this VCR as the dubbing source for another VCR. See “Installation” on Page 9 for the various possible connections.
Notes:
•Always use
•Most material performed in public, such as concerts, plays, and movies, or distributed on prerecorded video tapes is copyrighted. The unauthorized recording or duplication of copyrighted material is a violation of the copyright laws of most countries and such duplication may result in fines, imprison- ment, or both. Note, however, that in the United States, it is not a violation of U.S. copyright laws for a consumer to record a broadcast television program for private
To dub a tape, start playback on the dubbing source first (see that device’s instructions) then start recording on the recording VCR.