Radio Shack MX-500TM manual Erasing Existing Programming, Erasing Learned Buttons

Page 35

8. Erasing Existing Programming

A. Erasing Learned Buttons

1.Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the ERASE button next to the LCD screen.

3.Press the LEARN button.

4.If you wish to erase all the learned functions in the

MX-500TM, press the ALL button and then press the SURE? button at the next LCD screen.

5.If you wish to erase all the buttons in a single device or an individual button in the device, press the DEVICE button.

6.Press the device button (TV, VCR, Audio, etc.) to erase the button(s) from the device.

Tip: Press the PAGE button and then press the DEVICE button (TV, VCR, Audio, etc.) to erase the learned function in the device button itself. Programming this learned function to the Device button was explained in “Programming the Ten Device Buttons” earlier.

7.Press the ALL button if you wish to erase all the learned buttons in the device and press the SURE? button at the next LCD screen.

34

Image 35

Contents Home Theater Master R LCD Screen Table of Contents Table of Contents Introduction Introduction Batteries Preprogrammed Codes Summary of OperationsDescription of Devices M1, M2, M3, Power and System OFF Buttons Learning From Other Remote Controls Macro OperationsPunch Through Operations Ten Device ButtonsFavorite Channel Buttons All Other Operations Editing LCD TextCloning The MX-500TM LCD Screen And Button Layout Power Mute Volume ChannelSystem Settings ProgrammingtheMX-500TMtoControlYourComponents Using Preprogrammed Codes Three-Digit Code Number ProgrammingtheMX-500TMtoControlYourComponents ProgrammingtheMX-500TMtoControlYourComponents Auto Scan With Three-Digit Number ProgrammingtheMX-500TMtoControlYourComponents ProgrammingtheMX-500TMtoControlYourComponents Points to Remember Learning MethodProgramming The Function Buttons ProgrammingtheMX-500TMtoControlYourComponents Programming The Ten Device Buttons ProgrammingtheMX-500TMtoControlYourComponents Programming Favorite Channels Programming Favorite Channels Programming Macro Buttons Programming Macro Buttons Programming Macro Functions To The Ten Device Buttons Programming Macro Buttons Press CABLE. This takes you to the Cable device Programming Macro Buttons Programming Punch Through Functions Programming Punch Through Functions Erasing Existing Programming Erasing Favorite Channel Buttons Erasing Existing Programming Erasing Punch Through Functions Erase Macro Functions In The Ten Device ButtonsErasing Existing Programming To Create or Edit Text on Function and Device Buttons LCD Button EditingTo Create Or Edit Text for Favorite Channel Buttons Recalling the Preprogrammed Three-Digit Number Setting Backlight Cloning MX-500 Adjustment of LCD Contrast Low Battery Message Component See device Memory LockGlossary Glossary Glossary Glossary Pause See Delay Glossary Specifications WarrantyList of Preprogrammed LCD Text by Device AppendixVCR Cable Tape DVR Audio Set-Up Code TableThree-Digit Preprogrammed Code Table MCS SAT Admiral Metz VCR Salora CABLE/WEBTV Seren DVD BSR SAE 211 Tape DVR AUX AUX Light, Switch, etcPage Page Page Page Page OCE-0016H Rev03