Radio Shack MX-500TM manual Programming Punch Through Functions

Page 33

7. Programming Punch Through Functions

You can use the audio receiver volume control in a different mode (for example, Audio receiver Volume Up and Volume Down and Mute in Satellite mode) using the volume punch through feature. You can also have channel punch through (Channel Up, Channel Down) as well as eight VCR (or DVD) transport buttons (Play, Stop, Fast Forward and Rewind, Skip-, Skip+, Pause, Record) operate in another mode such as in Satellite, Cable and Audio modes.

1.Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the PUNCH button next to the LCD screen.

3.Press the VOL button on the LCD for Volume Punch Through, the PLAY button for Transport Punch Through and the CH button for Channel Punch Through.

4.Select the device you wish to punch through to (1st device example - Television or Cable box.)

5.Select the device you wish to punch through from (2nd device example - Audio receiver.)

You are punching through the controls of the second device to the device that is currently being controlled by any other buttons.

32

Image 33

Contents Home Theater Master R LCD Screen Table of Contents Table of Contents Introduction Introduction Batteries Summary of Operations Description of DevicesPreprogrammed Codes M1, M2, M3, Power and System OFF Buttons Learning From Other Remote Controls Macro OperationsTen Device Buttons Favorite Channel ButtonsPunch Through Operations Editing LCD Text Cloning The MX-500TMAll Other Operations LCD Screen And Button Layout Power Mute Volume ChannelSystem Settings ProgrammingtheMX-500TMtoControlYourComponents Using Preprogrammed Codes Three-Digit Code Number ProgrammingtheMX-500TMtoControlYourComponents ProgrammingtheMX-500TMtoControlYourComponents Auto Scan With Three-Digit Number ProgrammingtheMX-500TMtoControlYourComponents ProgrammingtheMX-500TMtoControlYourComponents Points to Remember Learning MethodProgramming The Function Buttons ProgrammingtheMX-500TMtoControlYourComponents Programming The Ten Device Buttons ProgrammingtheMX-500TMtoControlYourComponents Programming Favorite Channels Programming Favorite Channels Programming Macro Buttons Programming Macro Buttons Programming Macro Functions To The Ten Device Buttons Programming Macro Buttons Press CABLE. This takes you to the Cable device Programming Macro Buttons Programming Punch Through Functions Programming Punch Through Functions Erasing Existing Programming Erasing Favorite Channel Buttons Erasing Existing Programming Erasing Punch Through Functions Erase Macro Functions In The Ten Device ButtonsErasing Existing Programming To Create or Edit Text on Function and Device Buttons LCD Button EditingTo Create Or Edit Text for Favorite Channel Buttons Recalling the Preprogrammed Three-Digit Number Setting Backlight Cloning MX-500 Adjustment of LCD Contrast Low Battery Message Memory Lock GlossaryComponent See device Glossary Glossary Glossary Pause See Delay Glossary Specifications WarrantyList of Preprogrammed LCD Text by Device AppendixVCR Cable Tape DVR Set-Up Code Table Three-Digit Preprogrammed Code TableAudio MCS SAT Admiral Metz VCR Salora CABLE/WEBTV Seren DVD BSR SAE 211 Tape DVR AUX AUX Light, Switch, etcPage Page Page Page Page OCE-0016H Rev03