Radio Shack MX-500TM manual Recalling the Preprogrammed Three-Digit Number

9. LCD Button Editing

1.	A	B	C	2.		D	E	F
4.				5.
	J	K	L			M	N	O
7.				8.
	S	T	U			V	W	X
0.
	+	-	<	>	etc

3.G H I

6.P Q R

9.Y Z Blank

5.Save the text you completed by pressing the same function button you selected in step 4.

6.Exit from Edit mode by pressing the MAIN button and then exit from the SETUP mode by pressing the MAIN button once again.

10. Recalling the Preprogrammed Three-Digit Number

1.Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the RECAL button next to the LCD screen.

3.The LCD display will alternately flash device names and the three-digit code number assigned to the device for 10 seconds and then exit to the SETUP mode.

4.Before the 10 seconds are up, pressing the MAIN button on the remote will stop the flashing and exit to the SETUP mode.

5.Exit from SETUP mode by pressing the MAIN button once again.

41