Setting UP the Remote, Installing Batteries

15-1915b.fm Page 6 Monday, July 19, 1999 12:06 PM

SETTING UP THE REMOTE

INSTALLING BATTERIES

Cautions:

•Be sure to have fresh batteries ready to install before you remove the old batteries. The Pocket Remote’s memory only lasts about a minute without the batteries. If the memory is lost, simply re-enter the 4-digit manufacturers’ codes for your remote-con- trolled devices.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

1. Press the battery compart- ment cover’s tab and lift off the cover.

2. Install two AAA alkaline bat- teries (RadioShack Cat. No. 23-555) as indicated by the polarity symbols (+ and –) in the battery compartment.

3. Replace the cover.

If the Pocket Remote’s range decreases or the Pocket Remote operates erratically, replace its batteries.

Note: Do not place objects on top of the remote control after you install the batteries. This can press down keys and reduce battery life.

Need help? Call 1-800-950-7557