Introduction

15-1915b.fm Page 2 Monday, July 19, 1999 12:06 PM

Your RadioShack Pocket Remote Control can re- place up to three standard infrared remote con- trols.

Unlike some universal remote controls, the Pock- et Remote is preprogrammed and does not have to learn its commands from the original remote controls. All you have to do is tell the Pocket Re- mote which remote controls you want it to replace (by entering 4-digit codes), and the Pocket Re- mote does the rest. It’s as simple as A-B-C.

This manual includes a list of 4-digit manufactur- ers’ codes for TVs, VCRs, and cable converters. After you’ve entered the 4-digit manufacturers’ codes for your original remotes, the Pocket Re- mote is automatically ready to operate most of the same functions as the original remotes.

Your Pocket Remote’s features include:

Replaces Other Remotes — lets you replace up to three remote controls with one easy-to-use re- mote control.

Powerful Infrared Beam — in many cases, lets you operate your remote-controlled devices from a greater distance than with the original remote controls.

Convenient Keypad Design — places each control key in the best position for easy operation.

Handy Reference Label — provides a conve- nient place for you to write down the manufactur- ers’ codes for your devices.

Toll Free Support — you can get expert help for your Pocket Remote by calling 1-800-950-7557.

RadioShack is a registered trademark used by

Tandy Corporation.

X-10 is a registered trademark of X-10 (USA) Inc.

Need help? Call 1-800-950-7557