Troubleshooting
Problem | Solution |
|
|
LED does not blink | Replace batteries |
when you press a key. | with two (2) new AAA |
| alkaline batteries. |
|
|
LED blinks when you | Make sure the remote |
press a key, but device | is aimed at your device |
does not respond. | and is not more than 15 |
| feet away. |
LED blinks one long | An entry error has |
blink. | occurred (for example, |
| wrong key). Try entry |
| sequence again. |
|
|
Remote does not | Try all listed codes for |
control devices or | the device. Make sure |
commands are not | the device operates |
working properly. | with an infrared remote |
| control. |
|
|
CH+, | Due to RCA design |
do not work for your | from 1983 to 1987, only |
RCA TV. | the original remote |
| control operates these |
| functions |
|
|
No volume on a second | See “Changing Volume |
TV. | Lock.” |
|
|
Channels do not | If the original remote |
change properly. | control required you to |
| press Enter or OK to |
| change channels, press |
| Enter or OK on this |
| remote after entering |
| the channel number. |
|
|
12