You can assign any device key to work with any available device. For example, if you want to use AUD to control a second TV, simply follow the same steps listed in “Programming a Device” using the codes listed in “Manufacturers Codes” for your TV.
Searching for a Code
If your device does not respond to the remote after trying all codes listed for your brand or if your brand is not listed, try searching for your code.
Use the following device code digits to control a specific device:
Code Digit Device
0Cable / Satellite
1TV
2DVD, VCR, DVR/PVR
3Audio, Misc Audio
1.Turn on your device and, if needed, load media (for example, a DVD).
2.On the remote control, press a device key
(TV, CBL/SAT, DVD, VCR or AUD) once; it blinks once. Then press and hold P until the LED blinks twice.
3.Enter 9 9 1. The LED blinks twice.
4.Press the code digit for your device. The device key blinks twice. Aim the remote control at the device and press Power once.
5.Press and release the CH+ key continuously, then stop when the device turns off.
The remote is sending IR codes from its extensive library to the selected device, starting with the most popular code first.
6.Press Power. The device should turn on, then press P to lock in the code.
If the device does not turn on during step 6, slowly press and release CH- to go back through the codes, press and release P when the device turns on.