Preparation

15-1930.fm Page 5 Monday, July 19, 1999 1:09 PM

INSTALLING BATTERIES

Your remote control requires two AAA batteries (not supplied) for power. For the best performance and longest life, we recommend alkaline batteries such as RadioShack Cat. No. 23-555.

Cautions:

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries or different types of batteries.

•Do not press any of the remote control’s keys while installing batteries.

Note: The remote control’s built-in memory backup saves any programmed codes for about a minute af- ter the batteries have been removed. We recom- mend you have fresh batteries ready to install as soon as you remove the old ones.

1. Press the battery compartment cover’s tab and lift off the cover.

2.Place the batteries in the com- partment as indicated by the polarity symbols (+ and –)

marked inside.

3. Replace the cover.

When the remote control’s range decreases or it stops operating properly, replace the batteries.

Need help? Call 1-888-533-7135