4.2 Receiver
POWER 5V
HDMI OUTPUT
|
|
| VIDEO | DOC |
|
|
|
| CAT6 INPUT |
1 | 2 | 3 | 4 | 5 |
1Power 5V: Connect the 5 volt power supply included in box
2 HDMI Output: Connect an HDMI cable from your Display
3IR Receiver: Connect the IR receiver cable (included) to this input. Place the eye in front of the display, then use the existing remote to control the source equipment. The IR receiver accepts a frequency range from 20 KHz to 60 KHz.
4VIDEO CAT6 Input: Connect the Video output of the Transmitter to the video input of the Receiver using CAT6E / 23AWG / solid cable.
5DDC CAT6 Input: Connect the DDC output of the Transmitter to the DDC input of the Receiver using CAT6 cable. CAT5 cable can be used if available with the same result.
4