over CAT6 with IR Control
|
|
|
| HXC6IR | |
Table of Contents |
|
| |||
| 1. | Introduction | 1 |
| |
2. | Features | 2 |
| ||
3. | Package Contents | 2 |
| ||
4. | Operation Controls and Functions | 3 |
| ||
|
| 4.1 | Transmitter | 3 |
|
|
| 4.2 | Receiver | 4 |
|
5. | Pin Assignments | 5 |
| ||
|
| 5.1 | IR Pin Assignments | 5 |
|
|
| 5.2 | RJ45 Pin Assignments | 5 |
|
6. | Specifications | 6 |
| ||
| 7. Connection and Installation | 6 |
|
1. Introduction
Tributaries HXC6IR HDMI & IR transmitter & receiver over CAT6 is a fully digital product. Many similar type units are actually analog; they convert the digital HDMI signal to analog in the transmitter unit, send it to the receiver unit via CAT5E cable where it is converted back to a digital signal. Not only is this an expensive design but it also sacrifices performance by the repeated digital to analog and analog to digital conversions.
Consisting of 2 units, a transmitter and a receiver, the Tributaries HXC6IR can extend an HDMI signal and the source’s IR signal over dual CAT6 cables for a distance up to 145 feet (45 meters). The installation of the Tributaries HXC6IR is quick and easy. Simply place the transmitter next to your HDTV source, such as a DVD player, and then place the receiver close to your display. Complete the installation using Tributaries HDMI cables, the IR blaster & receiver (included) with the HXC6IR and 2 runs of CAT6.
1