Speco Technologies PC Pro Series user manual Launch E-Map, TV Out

Page 128

send out the alarm message.

•Network is switched off: when the network connection of DVR system is lost, the system will send out the alarm message.

•Hard Disk failed: when the hard disk can’t work normally, the system will send out the alarm message.

•Temperature: set a temperature limited of system for system to alarm. When DVR system temperature is over the temperature limited, the system will send out the alarm.

iTemperature setting only supports on NV DOM 6000 Express card.

•Illegal Entry: any objects move between selected regions which user has set up in Object Counting section (see also Chapter 4.2.1), the system will send out the alarm. Select the entry (object moves from region 1 to 2 or from region 2 to 1) and camera for system alarm detection.

-Enable/disable the POS Keyword check box, to scan the data from the POS if it matches the keyword (see also Chapter 4.9.11).

-Enable/disable the Alarm Message check box, to active with external alarm message by your own program. For the detail configuration, please contact the local reseller.

6.In (5) Alarm Reset, click the camera number (use W and X to select the alarm) to set the reset condition of alarm. Once alarm is reset, all alarm action will stop at the moment. If the sensor normal status is high, set the sensor condition to low.

7.In (6) Action, you may now set the alarm action for the system to perform when the alarm condition is activated.

-Launch E-Map

Display mini Emap screen.

-TV Out

Switch to only display the video on TV from where the alarm is activated.

-Enlarge Camera View

Switch to only display video in Preview/Advanced mode from where the alarm is activated.

-Send E-mail

Send an electronic text message. To setup click Detail (see also To Setup Send E-mail).

-File Transmission via FTP

Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see also To Setup FTP).

-Start Recording

Record the video from the selected camera. To setup click Detail (see also To Setup Alarm Recording).

-Alarm SOP (Standard Operation Procedure)

List the instructions to inform the person of what to do when the alarm is activated. To

120

Image 128

Contents PC Pro Series 300AC2FA-CPM M a D E I N T a I W a N European Community Compliance Statement Class a FCC Notice Class aFederal Communications Commission Statement Battery Safety Information Manual Conventions Table of Contents Chapter Using Functional Keys Using the Remote Programs Appendix a Package Contents Chapter IntroductionSpecification PC Pro SeriesSoftware Features Remote Access CentralManagement Dispatch ServerFront Panel Name FunctionNameFunction To Chapter Speed shuttle for adjusting reversed Front Panel Control Buttons in Guest Mode Mode FunctionBack Panel ChannelsChannels Hardware Installation Connecting DeviceRemote Controller Buttons Name Function Name Function Functional key for multiple system control Name Function Remote Controller Buttons in Guest Mode Sensor/Relay Interface pinhole allocation Pin # DefinitionAudio In Interface pinhole allocation 8Cahnnels ChannelsRunning the Unit for the First Time Using the DVR SoftwareFunction buttons in Advanced/Preview Mode To allow recording. The button turns violet when it is Setup Using Event Log Viewer Using the POS Viewer Using the Object Viewer Function Buttons in Playback Mode To start playing the recorded video file Full screen Function Buttons in Compact Mode Function Buttons in PTZ Camera Controller Setting Up and Using the Emap To Set Up the EmapTo Cut and Save the Wanted Portion of the Recorded Video To Use the EmapTo Search Using the Visual Search To Bookmark a Section of the VideoTo Search Using the Event Search To Search Using the Intelligent Search To Setup the PTZ/IP PTZ Camera Setup the PTZ CameraSetup the IP PTZ Camera Storage Path System SettingCustomizing the DVR System Hard Disk Calculator 3Language Video StandardCall Monitor Out Advance buttonBaud rate 9600 Data bits Parity Stop bit Flow control ConfigurationSystem Controller Setup IP Setup System ConfigurationDate/Time Setup HDD Format Automatically Select AutomaitcManual DisplayBeep if no signal Playback ModeEnable Overlay LoginTo Set the POS Setting Page Camera Setting Object Counting Face FinderEnable Mark to enable Trigger Condition Setting Video ScreenInput Analog CameraRemote DVR IP CameraSetup the Object Counting Click Detail to enter the object counting setup windowRecording Setting Enable Audio No RecordingMotion Detection Voice DetectionTo Playback Encrypted Video To Mask/Shield an area on the screenTo show and change the color of the Mask Network Setting Remote Control Server Network Video ConfigurationWebViewer Configuration User InformationOther Configuration UPnP Enable White ListEnable HandyView Network Bandwidth LimitSchedule Setting Backup Setting To Backup fileSet schedule at specific portion of time Turn on Relay #Setup Quick Backup Click Quick BackupSensor Setting To Setup External I/O Box Page Relay Setting Alarm Setting To set the Alarm SettingLaunch Emap Enlarge Camera View Relay OutputPlay Warning Sound Make Phone CallsSMS Short Message Service/MMS Multimedia Messaging System PTZ preset pointAlarm SOP Standard Operation Procedure Start RecordingTo Setup Alarm Relay To Setup the Alarm Sound SettingMail Server To Setup Call Out ListTo Setup Send E-mail Setting To Setup FTP Setting To Setup Alarm Recording SettingModem Dial up Setting MailTo Setup SMS/MMS Setting To Setup CMS Setting To Setup PTZ Preset Point9To Setup Alarm SOP Missing Object To Setup POS Keyword SettingMissing, Suspicious Object, and Scene Change Detected Enable Mask Suspicious ObjectScene Change User Setting Remote Access Time PasswordConfirm Password Visible CameraBackup Video Players Familiarizing QLogViewer Buttons 5678Familiarizing the Player Buttons Chapter Using Functional Keys Function Keys DescriptionUsing the Remote Programs Familiarizing the WebViewer Buttons Name Function Camera Name To Setup Remote System SettingCamera Setting Display Always Recording Familiarizing the WebViewer PTZ Buttons Familiarizing the Remote Console Buttons EmapRemote Server To Setup Remote Console SettingLanguage Using the Remote Playback Channel SettingsTo Make a Selection Familiarizing the Local Playback Buttons To start playing the recorded video file Familiarizing the RealTime Playback Buttons Name Function Familiarizing the Download and Playback Buttons To install PDAViewer thru ActiveSync Using HandyViewer to Access DVR serverUsing PDAViewer to Access DVR Server To install PDAViewer from the Internet To Use the PDAViewer Using JavaViewer to Access DVR Server To Use the JAVAViewer Way down to select the Help file 104 Click Start Programs DSS ImageVerification Image VerificationTo Run the ImageVerification program Chapter IEnhance Name Function To Use iStable Auto connect when star Web ToolsDispatch Server To Run Dispatch programRemote Setup To Add DVR serverDelete recorded data after To Setup Remote DVR ServerDelete event and alarm log after Virtual Keyboard TV OutPOS Camera Setting Camera DisplayRecord Setting Network Setting Main ConfigurationUser Login Enable HandyViewer Schedule Setting NetworkAlarm Setting Launch E-Map To Setup Alarm Relay To Setup Send E-mail Setting To back up the recoded data from the DVR server Remote BackupClick Start Program DSS Tool Remote Backup Page Page Using the Remote Control Server Appendix a Network Service Port 5150 DVR Ddns Upload / DownloadAppendix B Install PTZ through RS-232 Interface