53
6.4.9.Preset
Automatically moves the camera to a preset position. The preset position is the combined settings of pan, tilt, zoom and focus
Set
Set current camera position in memory.
Move
Move the camera to the currently selected camera position.
Location
Enter the installed location of current camera.
To input camera position in memory,
1.Use the Pan/Tilt functions to control the camera position.
2.Select the desired number from preset position menu for mew setting.
3.Auto Preset Button by pressing [Set] button.
4.Input the present location by pressing [Location] button.
To use preset camera location,
1.Select the location to move in preset position.
2.Move to the location by pressing Preset [Move] button or by clicking the item of the selected category with the left mouse.
Scan
Rotate the currently memorized camera location in PAN sequence.
6.4.10.Exterior Equipment
The exterior equipment icon will not appear when the function is not supported by protocol
Camera Power
The camera power can be turned on or off by
Power.
Aux
When any of the accessories are installed to a camera (such as siren), choose the number corresponding to the accessory used and enter the desired preset operating time. Then, click on the Aux. Icon. The selected accessory will operate for the duration of entered preset time and automatically shut off when the preset operating time expires.
Registered Accessory Information
Register or modify information on each currently installed accessory. Click on the accessory’s number to view registered information on the accessory.