Venturer KLV39082 Safety Precautions, Following marks and symbols are located on back of the unit

Page 2

SAFETY PRECAUTIONS

The following marks and symbols are located on back of the unit.

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.

Caution marking is located on back enclosure of the unit.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT.

CAUTION

INVISIBLE LASER RADIATION IS EMITTED WHEN OPENED AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM

This product contains a low power laser device.

The symbol for Class (Double lnsulation)

On Placement

Do not use the unit in places which are extremely hot, cold, dusty, or humid.

Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on carpeting.

On Safety

When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.

On Condensation

When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before use.

- 1 -

Image 2
Contents Page Safety Precautions Following marks and symbols are located on back of the unitFCC Information Important Safety Instructions Table of Contents Disc Function or Operation that is Not Available Disc FormatsRegion Management Information Icons Used on DVDsAccessories Remote ControlRemote Control Control Reference GuideSetup Button VOLUME+ Button Adjusts the volume Play Button24 / Tuning Buttons Function ButtonUnit Mounting Instructions StepFrom previous Connecting the AM Loop Antenna and FM Wire Antenna Connecting the TV AntennaConnecting the Unit to a TV or other Video Equipment ConnectionsPlugging in the Unit AC power cord To AC outletMonitor Operation Dolby Digital for DVD Unit OperationTurning the Unit On Setting the Clock Setting the Cooking TimerStopping Playback Pausing Playback Still ModePlaying a Disc Skipping to a Different Chapter/TrackAudio Selection Angle SelectionSubtitle Selection Sequence of angle shotsLocating a Specific Title/Chapter/Time Special FunctionDisplay Function Locating a Specific TrackSetting Favorite Bookmarks During Playback Repeat PlaybackDVD Programmed Playback DVD Programmable MemoryViewing Jpeg Files Clear the Programmed Tracks/Files Play Modes for CD or Jpeg DiscCD Track/JPEG File Programmed Playback Repeat Off/Single/AllVideo Customizing the Function SettingsLanguage Use Default Settings DefaultView Mode Smart PictureNtsc TV mode Using the TVAtsc TV mode Manual Searching for TV ChannelsSound Setting TV SetupPicture Setting Time Zone / Day Saving Time / Clock TV Timer SettingMisc Setting TV Channel Setting Listening to the Radio Troubleshooting Guide Symptom Cause and RemedyCleaning the Disc MaintenanceSpecifications Cleaning the UnitLimited Warranty