Transition Networks CSDTF1022-100 CSDTF10xx in the Network, Technical Specifications, Features

CSDTF10xx IN THE NETWORK

NOTE: THE CSDTF10xx REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK.

T1/E1 Network Extension

TECHNICAL SPECIFICATIONS

Standards	Emissions: CISPR A
	T1/E1 Physical Layer: ITU-T, ANSI, AT&T, ETSI
Dimensions	2.9" x 4.8" x 1.4"
Weight	8 oz (approximate)
Power Consumption	5 watts
Environment	Typical Operating Temperature*: 0° to 50°C (32° to 122°F )
	Storage Temperature:	-20° to 85°C (-4° to 185°F)
	Humidity	10-90%, non condensing

Media			PWR	SPD	PWR	SPD
Conversion
Center				FRX	FLNK	FRX
1	Power	10BASE-T	LKC	CRX	CLNK	CRX
	In Use		-DB9
	Power			TX		TX
2				100BASE-FX
	In Use
		INPORT				10/100SX
		OUTPORT		RX
						RX
		MCCM10
		MGMT MASTER
						10/100TX

Media
Conversion
Center
1	Power	10BASE-T	DB-9
	In Use
2	Power
	In Use
		INPORT
		OUTPORT
		MCCM10
		MGMT MASTER

PWR	SPD	PWR	SPD
	FRX	FLNK	FRX
LKC	CRX	CLNK	CRX
	TX
	100BASE-FX		TX
			10/100SX
	RX
			RX
			10/100TX

	Altitude	0-10,000 feet
Warranty	Lifetime

*Operating temperature range for this Slide-In-Module depends on the physical characteristics and the installation configuration of the TRANSITION Networks chassis in which this Slide-In-Module will be installed. See the User’s Guide for the chassis in which this Slide-In-Module will be installed for a discussion of temperature-related installation constraints.

CSU

NOTE: T1/E1 MEDIA CONVERTERS MUST BE USED IN PAIRS. A TRANSITION Networks CSDTF10xx chassis media converter can be used with another CSDTF10xx chassis media converter, a SSDTF10xx stand-alone media converter, or with a previous model TRANSITION Networks T1/E1 media converter, such as a C/T1E1-CF-01 or a T1E1-CF-01.

Features

•Media converter is framing independent (as ESF vs D4) and supports all common line codes, (AMI, B8ZS, HDB3).

•Dry relay contacts allow media converter to be tied into separate alarm circuit

•All Ones Insertion (AIS) on loss of signal at copper and/or fiber interface.

		DECLARATION OF CONFORMITY
Name of Mfg:	Transition Networks
	6475 City West Parkway, Minneapolis MN 55344 USA

Model:CSDTF10xx Series Copper-to-Fiber Media Converter

Part Number: CSDTF1011-100, CSDTF1012-100, CSDTF1013-100,

CSDTF1022-100

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the CSDTF10xx to which this declaration refers is in conformity with the following standards.

EN 55022:1994; EN 55024:1998; FCC Part 15 Class A; EN 60950 A4:1997; UL 1950

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

	_January 8, 2001_____
Stephen Anderson, Vice-President of Engineering	Date