Texas Instruments TVP5146EVM quick start Control Definition

	SLEU063
	Table 5. Register Map Editor Controls
Control	Definition
Register Window	Scrolling text box that displays the address and data for the I2C registers that are defined
	for the device.
Address Edit Box	This contains the I2C subaddress that will be accessed using the Write and Read
	buttons. Clicking on a row selects an address, which then appears in the address edit
	box.
	NOTE: After clicking on a row, the Data Edit box contains the data that was in the
	register window. The device has not yet been read.
	The address up/down arrows are used to jump to the next/previous subaddress that is
	defined for the device. If an address is not defined for the device, then it can still be
	accessed by typing the subaddress in the Address Edit box.
Data Edit Box	This contains the data which will be written to or was read from the I2C subaddress.
	The data up/down arrows incr/decr the data value by 1.
Write Button	Writes the byte in the Data Edit box to the address in the Address Edit box.
	The I2C register is written to whether or not the data is different from the last time the
	register was read.
Read Button	Reads the data from the address in the Address Edit box into the Data Edit box and the
	register window.
Read All Button	Reads all defined readable registers from the device and updates the register window.
Hex Button	Converts all values in the register window and address and data edit boxes to
	hexadecimal.
Dec Button	Converts all values in the register window and address and data edit boxes to decimal.
Close Button	Closes the dialog.
	NOTE: Multiple edit register map windows can be open at the same time (one for each
	device). Use the Window menu to navigate.
Loop Count	Causes subsequent write or read operations to be performed N times. N is entered as a
	decimal number from 1 to 999.
Edit Indirect Registers	Opens the indirect register editor of the TVP5160.

TVP5160EVM User’s Guide 25