Winegard HD-7015, YAGI SERIES, HD-7010, HD7210P, HD-5030 installation instructions VHF/UHF Models

Page 1

HOW TO PROVIDE

Fig. 9

LIGHTNING PROTECTION

 

FOR TV ANTENNA AND SET

 

Step 1. Mount the lightning arrestor or

 

75 ohm coaxial grounding block as close

 

as possible to where the 75 ohm coaxial

 

cable downlead enters the house. See

 

Figure 9.

 

Step 2. The ground wires for both the mast and the downlead should be cop- per or aluminum wire, number eight (8) or larger. See Figure 9.

Electric

Service

Step 3. The downlead wire from the Equipment antenna to the lightning arrestor and the

mast ground wire should be secured to

Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70

Antenna Lead

In Wire

Ground

Clamp

Antenna

Discharge Unit

(NEC Section 810-20)

(May substitute a 75 ohm Coax Grounding Block)

High Definition (HD) Platinum Antennas

INSTRUCTIONS

VHF/UHF MODELS

HD7210P, HD-7010, HD-7015,

VHF ONLY

HD-5030 & YAGI SERIES

the house, spaced from four (4) to six (6) feet apart. See Fig. 9.

Ground Clamps

Grounding Conductors (NEC Section 810-21)

WARNING

INSTALLATION OF THIS ANTENNA NEAR POWER

NOTE: In the case of a “ground up” antenna installation, it may not be nec- essary to ground the mast if the mast extends four or more feet int the earth. Consult a TV serviceman for the proper depth in your location.

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC - National Electrical Code

LINES IS DANGEROUS. FOR YOUR SAFETY, FOLLOW

THE INSTALLATION INSTRUCTIONS.

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in materials or workmanship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 800-288-8094).

Winegard Company (at its option) will either repair or replace the defective product at no charge to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation of the product. This limited warranty does not apply if the product is damaged, deteriorates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering, modification of the product as originally manufactured by Winegard, usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid rain.

The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all han- dling and freight charges prepaid to your Winegard dealer for return to our factory for repair or replacement. Winegard dealers will arrange for the replacement or repair and return to you without charge the product which failed due to defective material or workmanship.

WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRAN- TIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial loss, or from any other loss or damage except as set forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Rev. 2/08

Printed in U.S.A. © Winegard Company 2003 1450172 REV4, 10/10

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

Image 1
Contents VHF/UHF Models YA- Models only Attaching Coax for Yagi Models Installed in FactoryFor ALL Models For TWO-PIECE Boom Models