Tripp Lite B118-002, B118-004 owner manual Standard Installation Instructions

Page 3

Standard Installation Instructions

Note: The maximum distances referenced in these instructions have been tested at a video resolution of 1080p (60Hz) with 36-bit (12-bits per channel) Deep Color using 28AWG HDMI cables. Longer distances between the splitter and connected monitors are achievable using 24AWG HDMI cables and/or a source that is set to display a lower video resolution.

1Make sure that the power to all devices that you will be connecting is turned off.

2Connect the HDMI source to the Input port on the splitter.

Note: The length of the HDMI cable connecting the source to the splitter must not exceed 13 ft. (4 m).

3Connect an available Output port on the splitter to the HDMI input port of your display.

Note: The length of the HDMI cable connecting the splitter to the display must not exceed 16 ft. (5 m).

4Repeat step 3 for the remaining Output ports on the splitter.

5Connect the included power supply to the splitter, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS).

6Turn on the power to the HDMI source and displays.

3

13-07-120 93-32BD.indd 3

8/2/2013 4:04:44 PM

Image 3
Contents Hdmi Splitters Package Contents Product FeaturesStandard Installation Instructions Cascaded Installation Instructions Troubleshooting Year Limited Warranty Warranty & Warranty RegistrationWarranty & Warranty Registration 13-07-120 93-32BD.indd 2013 40445 PM