Cascaded Installation Instructions
Note: The maximum distances referenced in these instructions have been tested at a video resolution of 1080p (60Hz) with
1Make sure that the power to all devices that you will be connecting is turned off.
2Connect the HDMI source to the Input port on the first level splitter.
Note: The length of the HDMI cable connecting the source to the splitter must not exceed 13 ft. (4 m).
3Connect an available Output port on the first level splitter to the HDMI input port on a second level splitter.
Note: The length of the HDMI cable connecting the first and second level splitters must not exceed 16 ft. (5 m).
4Repeat step 3 for each additional splitter that you wish to add, adding no more than 6 levels of splitters.
5Connect an available Output port to the HDMI input port of your display.
Note: The length of the HDMI cable connecting the splitter to the display must not exceed 16 ft. (5 m).
6Repeat step 5 for the remaining Output ports in the installation.
7Connect the included power supply to each splitter, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS).
8Turn on the power to the HDMI source and displays.
4
8/2/2013 4:04:44 PM |