Installation, Installing unit on roof of vehicle

Installation

Installing unit on roof of vehicle —

!Install in DRY conditions only!

IMPORTANT! Do not install this system

in the rain, or under any wet conditions. Moisture may affect electronics and void your warranty!

1.For best performance and to reduce signal acquisi- tion time, park vehicle on a level surface.

6.On each foot, screw the flange nut to the base of the leveling screw on the mounting foot, flange up. Place rubber washer, with the rubber side up, on the nut, Figure 2. Push mounting foot under base. Push foot screw through the base and tighten lock nut to secure foot to base. Be sure the base feet are pointing away from the base. Base feet will be re- moved later during install.

FIGURE 2

2.Select a level spot on your roof for installation.

•The unit should be no more than +/-1° off level.

•Be sure no roof-mounted equipment is blocking the satellite “line of sight.”

•You will need to decide where the wires will enter the vehicle. A coax and an 18 gauge power wire will need to be placed in the vehicle. The power wire will go to the nearest +12 VDC power source; the coax will be routed through the demulitplexer to your satellite receiver. These wires should be hidden.

3.Remove screws holding dome to base and remove dome. Place dome in safe spot to avoid damage. Place base on vehicle roof in the location selected.

4.Remove wire ties used for shipping. There are three; one on each side of the reflector and one at the the rear of the reflector holding down the counter- weight. See Figure 1, page 4.

5.Determine which programming you will be using. This will determine how you set your switches.

For DISH NetworkTM set switches to 119°.

For DIRECTV® set switches to 101°.

For ExpressVuTM set switches 092°.

LEVELING SCREW

MOUNTING

RUBBER WASHER	FOOT
	FOOT
FLANGE NUT
(FLANGE UP)

7.After selecting location for unit (see step 2), put the unit on the centerline of the coach.

REAR MOUNTING FOOT MUST FACE DIRECTLY OFF REAR OF VEHICLE, Figure 1. There is a 30 foot power cord and 30 foot coax cable going through the Heyco® con- nectors on the base.

Placing the rear base bracket on the centerline, facing the rear of the vehicle, will center the unit.

8.Using the chart, Obstruction Ht. Unit Clearance

determine the	8”	4”
minimum distances to	10”	11.5”
other equipment.	12”	19”
Measure these	15”	32”
distances as	15”	32”
distances as
demonstrated in Figure 3.
FIGURE 3

		UNIT BASE

If you have trouble seeing the numbers, try using a magnifying glass!

MV-0500 specifications

The Winegard MV-0500 is an advanced outdoor TV antenna that is designed to deliver reliable reception and superior performance for both rural and urban users. With a sleek and modern design, this antenna is ideal for enhancing your television viewing experience by providing access to free over-the-air channels. One of the standout features of the MV-0500 is its unique built-in amplifier, which boosts signal strength for improved clarity and range, enabling users to pick up channels that may be out of reach for standard antennas.

This antenna is engineered with a lightweight and durable construction, making it suitable for various installation environments. It comes with a compact design that minimizes wind load, thus reducing the risk of damage during adverse weather conditions. The MV-0500 is also equipped with a multi-directional reception capability, which allows it to capture signals from multiple directions without constant repositioning.

In terms of technology, the Winegard MV-0500 utilizes advanced digital signal processing to deliver crystal-clear picture quality and minimize pixelation. This ensures that viewers enjoy their favorite shows with less interruption and a more immersive experience. Furthermore, the antenna's weather-resistant materials offer added durability, making it a long-lasting solution for reliable TV reception.

The MV-0500 is compatible with both standard and high-definition broadcasts, ensuring that users can enjoy a wide array of programming options. Installation is straightforward, thanks to the included mounting hardware and user-friendly instructions. The antenna's design facilitates optimal signal capture, making it an excellent choice for individuals looking to cut the cord and transition from cable television to free digital broadcasting.

One of the attractive aspects of the Winegard MV-0500 is its ability to enhance reception for multiple TVs in one household when paired with the appropriate splitters. This feature, combined with its affordability, makes it a popular choice among budget-conscious consumers seeking quality performance without compromising on viewing options.

In summary, the Winegard MV-0500 stands out for its robust design, advanced technology, and excellent reception capabilities, making it a worthy investment for anyone seeking to maximize their free digital TV experience. With its combination of modern features and user-friendly setup, it caters to both seasoned cord-cutters and those new to the world of digital broadcasting.