Connecting one receiver, Connecting the receiver

Installation • Wiring

Connecting the receiver —

Connecting one receiver

1.Connect the coax cable from the MV-0500 to the “SATELLITE IN” on the receiver.

WIRING ONE RECEIVER

SATELLITE IN

SAT RECEIVER

Connecting two receivers

1.Connect the coax cable coming from the MV-0500 to the “ SATELLITE IN” input on the primary re- ceiver. The primary receiver is the reciever used most often.

2.Run a second cable through the empty Heyco open- ing and connect to the ground block-type feed through and connect the other end of this cable to “Satellite IN” input on the second receiver.

WIRING TWO RECEIVERS

SATELLITE IN

SAT RECEIVER

SATELLITE IN

SAT RECEIVER

GROUND BLOCK

CUSTOMER/INSTALLER

PROVIDES COAX

PRIMARY

RECEIVER

USED ONLY WITH

2 RECEIVERS

Initializing & replacing the dome after connecting the receiver(s) —

1.Be sure vehicle is in a location free of all obstruc- tions and with a clear view of the satellite.

2.DO NOT MOVE VEHICLE during the first initial- ization. Power up unit, turn on receiver. FOR THE FIRST TIME ONLY, the unit may take up to 10 min- utes to initially find the satellite signal. The GPS is also initializing at this time. After the GPS initializes, the unit will begin searching for the correct satellite.

3.If the GPS does not initialize at this time, turn off the unit. You may need to move the GPS antenna to a different location on your roof. After you move the

GPS, DO NOT SECURE TO ROOF.

4.TEST YOUR SYSTEM BEFORE SECURING THE GPS ANTENNA. Make sure the TV/receiver have the correct satellite.

5.After the correct satellite has been found, secure GPS antenna by removing adhesive backing and se- curing to roof.

6.Install dome. NOTE: After Heyco conmectors are tightened, apply bead of silicone around the connec- tor where the exterior hex nut touches the base and around the cables where they enter the Heyco on the exterior of the unit. See drawing below. If second receiver is not used, apply silicone to seal center hole of third Heyco. See drawing below.

HEYCO CONNECTOR

APPLY SILICONE BEAD AT BASE OF HEYCO

CONNECTOR

UNIT BASE

APPLY SILICONE BEAD IN HOLE WHERE COAX ENTERS

8.Before inserting screws on sides of dome, apply silicone to ENTIRE oval slot in gasket AND to screw threads, then insert screws and tighten. See drawing.

FILL OVAL

WITH SILICONE

FILL SCREW THREADS

WITH SILICONE

BEFORE INSERTING

MV-0500 specifications

The Winegard MV-0500 is an advanced outdoor TV antenna that is designed to deliver reliable reception and superior performance for both rural and urban users. With a sleek and modern design, this antenna is ideal for enhancing your television viewing experience by providing access to free over-the-air channels. One of the standout features of the MV-0500 is its unique built-in amplifier, which boosts signal strength for improved clarity and range, enabling users to pick up channels that may be out of reach for standard antennas.

This antenna is engineered with a lightweight and durable construction, making it suitable for various installation environments. It comes with a compact design that minimizes wind load, thus reducing the risk of damage during adverse weather conditions. The MV-0500 is also equipped with a multi-directional reception capability, which allows it to capture signals from multiple directions without constant repositioning.

In terms of technology, the Winegard MV-0500 utilizes advanced digital signal processing to deliver crystal-clear picture quality and minimize pixelation. This ensures that viewers enjoy their favorite shows with less interruption and a more immersive experience. Furthermore, the antenna's weather-resistant materials offer added durability, making it a long-lasting solution for reliable TV reception.

The MV-0500 is compatible with both standard and high-definition broadcasts, ensuring that users can enjoy a wide array of programming options. Installation is straightforward, thanks to the included mounting hardware and user-friendly instructions. The antenna's design facilitates optimal signal capture, making it an excellent choice for individuals looking to cut the cord and transition from cable television to free digital broadcasting.

One of the attractive aspects of the Winegard MV-0500 is its ability to enhance reception for multiple TVs in one household when paired with the appropriate splitters. This feature, combined with its affordability, makes it a popular choice among budget-conscious consumers seeking quality performance without compromising on viewing options.

In summary, the Winegard MV-0500 stands out for its robust design, advanced technology, and excellent reception capabilities, making it a worthy investment for anyone seeking to maximize their free digital TV experience. With its combination of modern features and user-friendly setup, it caters to both seasoned cord-cutters and those new to the world of digital broadcasting.