Winegard G2 instruction manual Dish Receiver Setup, Select Check Switch

Page 5

DISH Receiver Setup

If using two DISH receivers with the Carryout G2

antenna, both receivers must be configured off of the primary port by following the steps below.

1.Disconnect coax cable from the Satellite In port on the back of the receiver.

Satellite In

port

Back of 211z receiver shown

2.Press Menu on your remote. Select option 6, System Setup.

3.Select option 1, Installation.

4.Select option 1, Point Dish.

5.Select Check Switch.

6.Select Test. It will go through a number of steps, then return to the screen shown here with previous information cleared. If at any point it asks you to save, select Save or Yes.

7.Reconnect coax cable to “Sat In” port on back of receiver. Power on the antenna. Allow the antenna 3–4 minutes to acquire satellites.

8.Check that there are no checkmarks by SuperDISH or Alternate. If setting up a DISH 311, 301, or 500 series receiver, in some cases you may need to check the boxes next to Superdish and Alternate before running the Check Switch test.

9.Next, select Test again to install the SW64 switch. This SW64 switch is a DISH receiver setting, not a physical part.

10.When you see the SW64 as the installed switch, the antenna is ready for use.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Do not return antenna to place of purchase Compatible Satellites SpecificationsCompatible Receivers Installing the Handle Switch SettingsWiring the Antenna Switch Settings-Up or DownDirectv Receiver Setup Receiver SetupSelect Check Switch Dish Receiver SetupTransporting & Maintenance TroubleshootingOptional Accessories Alt. Power Supply SpecsFCC Guidelines Return Authorization PolicyReceptores compatibles EspecificacionesSatélites compatibles Compatibilidad del receptor con DirectvElección de la ubicación AdvertenciasAjustes del conmutador Instalación de la manijaInstalación del Receptor Configuración del receptor DirectvConfiguración Seleccione Configuración del sistema Seleccione revisar interruptor Configuración del receptor DishTransporte y Mantenimiento Solución de problemasAccesorios opcionales Uso del receptor externoPolítica DE Autorización DE Devolución Directrices de la FCCSatellites compatibles SpécificationsRécepteurs compatibles Choix d’un emplacement Installation de la poignéeAvertissements Réglages des commutateursEt Installation Sélectionnez Installation du système Installation du récepteurInstallation du récepteur Directv Sélectionnez Vérifier le commutateur Installation des récepteurs DishDépannage Accessoires en optionTransport et entretien Utilisation d’un réceptacle extérieurPolitique D’AUTORISATION DE Retours Directives FCC2452321

G2 specifications

The Winegard G2 is a notable satellite TV antenna designed for mobile applications, such as RVs, trucks, and boats. Catering to the ever-growing demand for reliable satellite connectivity on the move, this antenna is compact, versatile, and packed with cutting-edge technology.

One of the standout features of the Winegard G2 is its automatic satellite acquisition system. This technology enables users to quickly lock onto satellite signals without the need for manual adjustments. With a push of a button, the G2 can locate and connect to satellites, allowing users to enjoy uninterrupted television viewing whether parked in a campground or traveling on the open road.

The antenna supports multiple satellite services, including DirecTV and DISH Network, making it a versatile choice for users preferring different providers. The system is designed to automatically switch between satellites, ensuring that users can continue to access their favorite programming seamlessly, even when on the move.

Lightweight and aerodynamic, the Winegard G2 is engineered for minimal wind resistance and easy installation. Its low-profile design means it can be mounted on the roof of an RV or vehicle without compromising aesthetics or increasing drag significantly. The package includes all necessary mounting hardware, making the installation process straightforward for users of varying technical skill levels.

The G2 utilizes advanced technology to ensure a strong signal reception even in challenging environments. Built with high-performance components and optimized for both K_u and K_band frequencies, it effectively minimizes interference and maximizes clarity for satellite TV viewing.

In terms of durability, the Winegard G2 is designed to withstand the elements. It features a rugged casing that protects it from rain, snow, and UV exposure. Additionally, it functions well in extreme weather conditions, making it a reliable companion for adventurous travelers.

Overall, the Winegard G2 stands out in the market for mobile satellite antennas due to its blend of ease of use, advanced technology, and robust design. For those looking to enjoy satellite television while exploring new destinations, the G2 offers a dependable solution that keeps viewers connected and entertained, regardless of their location.
Top Page Image Contents