Intermec PF4I manual Setup Mode Serial Communication uart1, Intermec Fingerprint

Chapter 7—Setup Mode

Setup Mode; Serial Communication "uart1:"

(Intermec Fingerprint v8.20)

SETUP: SER-COM, UART1

SETUP:	SETUP:	SETUP:	SETUP:	Continued on
SER-COM, UART2	SER-COM, UART3	NET-COM, NET1	NETWORK	the next page
See separate overview	See separate overview	See separate overview	See separate overview

SER-COM, UART1:	SER-COM, UART1:	SER-COM, UART1:	SER-COM, UART1:	SER-COM, UART1:
BAUDRATE	CHAR LENGTH	PARITY	STOP BITS	FLOWCONTROL
BAUDRATE;	CHAR LENGTH	PARITY:	STOP BITS:	FLOW CONTROL:	FLOW CONTROL:
9600	8	NONE	1	RTS/CTS	ENQ/ACK
19200	7	EVEN	2
38400		ODD	Scroll forward
57500		MARK		RTS/CTS:	ENQ-ACK:
			Scroll back
115200		SPACE		DISABLE	DISABLE
300		Scroll forward		ENABLE	ENABLE
600				Scroll forward	Scroll forward
1200		Scroll back
				Scroll back	Scroll back
2400
4800
	Scroll forward
	Scroll back
			SER-COM, UART1:	SER-COM, UART1:	SER-COM, UART1:
			NEW LINE	REC BUF	TRANS BUF
	FLOW CONTROL:		NEW LINE:	REC BUF:	TRANS BUF:
	XON/XOFF		CR/LF	[1024]:	[1024]:
			LF
			CR

XON/XOFF:			XON/XOFF:			Scroll forward
DATA TO		HOST	DATA FROM		HOST
						Scroll back
DATA TO		HOST:	DATA FROM		HOST:
DISABLE			DISABLE
	ENABLE			ENABLE
	Scroll forward			Scroll forward
	Scroll back			Scroll back

Legend:

Dotted boxes and lines indicate options.

Thick boxes indicates default options.

Values inside brackets indicate default settings.

Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 67