Intermec PF4I manual ⇒ Copy Length, ⇒ LSS Detection Position, ⇒ Detection Slit Length

Appendix B—Media Specifications

Tickets with Gaps ⇐ a ⇒ Media Width

Maximum:	114.3 mm	(4.50 inches)
Minimum (standard):	25.0 mm	(1.00 inches)
Min. (narrow Quick-Load):	40.0 mm	(1.57 inches)
Min. (wide Quick-Load):	80.0 mm	(3.15 inches)

⇐ b ⇒ Copy Length

Max. length between slots: depends on SDRAM size

Min. length between slots: 8.0 mm (0.32 inches)

Under ideal circumstances, a minimum ticket length of 4 mm (0.16 inches) could be used. It requires the sum of the copy length (b) and the detection slit height (e) to be larger than 7 mm (0.28 inches), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to the user to test this in his unique application.

⇐c ⇒ LSS Detection Position

Five fixed positions, see Chapter 12.

⇐d ⇒ Detection Slit Length

The length of the detection slit (excluding corner radii) must be mini- mum 2.5 mm (0.10 inches) on either side of the LSS detection position

(e).

⇐e ⇒ Detection Slit Height

Maximum:	21.3 mm (0.83 inches)
Recommended:	1.6 mm	(0.06 inches)
Minimum:	1.2 mm	(0.05 inches)

Media Type Setup

• Ticket (w gaps)

Note: Do not allow any perforation to break the edge of the media as this may cause the media to split and jam the printer.

126 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)