Intermec PF4I manual Appendix A-Technical Data

Appendix A—Technical Data

Printing

Print Technique	Direct Thermal and Thermal Transfer
Printhead Resolution	8 dots/mm (203.2 dpi)	Option 300 dpi
Print Speed (variable)	100 to 200 mm/sec. (≈ 4 to 8 in./sec.)	8 dots/mm
	100 to 150 mm/sec. (≈ 4 to 6 in./sec.)	300 dpi
Print Width (max)	104 mm (4.095 inches)	8 dots/mm
	105.7 mm (4.161 inches)	300 dpi
Print Length (max)	32767 dots = 409.5 cm (161.25 in.)1
Media Width (min/max)	25 to 114.3 mm (1 to 4.5 inches)	Standard edge
		guide
Media Width (min/max)	40/80 to 114.3 mm (1.57/3.15 to 4.5	Quick-Load
	inches)	guides
Media Roll Diameter	152 mm (6.00 inches)	Long side door
(max)	213 mm (8.38 inches)	Megatop
Media Roll Core Diameter	38 to 40 mm (1.5 inches) or 76 mm
	(3 inches)
Ribbon Width (min/max)	25 to 110 mm (1 to 4.33 inches)
Ribbon Roll Diameter	65 mm (2.56 inches) equivalent to	Depending on
(outer)	240-300 m (787-985 ft) of ribbon	ribbon thickness
Ribbon Roll Core Dia-	25.4 mm (1.00 inches)
meter (inner)
Print Directions	4
Modes of Operation
Tear-Off (Straight-	Yes
through)
Cut-Off	Optional	With cutter
Peel-Off (Self-strip)	Optional	With liner
		takeup unit
Firmware
Operating System	Intermec Fingerprint v8.20	Incl. Direct
		Protocol
Smooth Fonts	TrueDoc and TrueType fonts
Built-in scaleable fonts	15	Unicode fonts2
(std)
Built-in bar code symbolo-	53
gies (std)
Startup Program (std)	Intermec Shell v8.1

116 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)