6 Setting Up the Printer
This chapter describes the various parameters that are used in the Setup Mode (see Chapter 7) or in the vari- ous application programs to configure the printer for the user’s specific requirements. It covers the following topics:
•Description
•Default setup
•Setup Parameters in regard of communication, feed adjust, media, and print defines.
When measures are specified as “dots”, the actual length in millimeters or inches depends on the printhead density. Convert as follows:
8 dots/mm (203.2 dots/inch) printhead:
1 dots = 0.125 mm = 0.0049 inches (4.9 mils)
11.81dots/mm (300 dots/inch) printhead: 1 dot = 0.085 mm = 0.0033 inches (3.3 mils)
Intermec EasyCoder PF4i Compact | 45 |
