Intermec PF4I manual Recommended Paper Type Settings Europe

Appendix D—Intermec Supplies

Recommended Paper Type Settings (Europe)

Direct Thermal Printing; 8 dots/mm (203.2 dpi)

Type/Speed	Name	Label	Label	Max Rec. Print Speed1
		Constant	Factor	Dir 1&32	Dir 2&43
Top Coated/	Thermal Top Board4	105	40	100	100
Standard	Thermal Top	100	40	200	150
Non Top Coated/ Thermal Eco		95	40	200	150
Standard	Thermal Eco Board4	85	40	200	150
Top Coated/High Thermal Top High Speed		90	40	200	200

Thermal Transfer Printing; 8 dots/mm (203.2 dpi)

Type/Speed	Name	Ribbon	Ribbon Label		Max Rec. Print Speed1
		Constant	Factor	Offset	Dir 1&32	Dir 2&43
GP02	TTR Uncoated	75	25	0	150	150
	TTR Coated	80	25	0	150	150
	TTR Premium	70	25	0	200	200
HP66	TTR Coated	100	25	0	200	200
	TTR Premium	80	25	0	200	200
	TTR Premium Board4	105	25	0	150	150
	TTR High Gloss White	95	25	0	200	200
	TTR Polyethylene	75	25	0	200	150
	TTR Gloss Polyethylene	90	25	0	200	200
HP07	TTR Coated	100	25	0	200	200
	TTR Premium	90	25	0	200	200
	TTR Premium Board4	105	25	0	150	150
	TTR Polyethylene	85	25	0	200	200
	TTR Gloss Polyethylene	95	25	0	200	150
HP05	TTR Coated	100	25	0	200	200
	TTR Premium	80	25	0	200	200
	TTR Premium Board4	95	25	0	200	200
	TTR High Gloss White	80	25	0	200	200
	TTR Polyethylene	75	25	0	200	150
	TTR Gloss Polyethylene	80	25	0	200	200
HR03	TTR High Gloss Polyester 100		30	0	200	200

1/. Exceeding the recommended print speed may cause the printhead to wear out prema- turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by 50 mm/sec.

2/. Applies to printing of text, lines, boxes, images, and picket fence bar codes.

3/. Applies to ladder bar codes.

4/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).

142 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)