Chapter 9—Options
Side Doors and Megatop
The EasyCoder PF4i Compact Industrial comes with two types of side door. The standard long door encloses the entire media compartment and allows a media roll with a diameter of 152 mm (6 inches). It also has a slot for external media supply. The 8-inch Megatop has a hinged trans- parent canopy that encloses a media roll with a diameter of up to 213
mm(8.38 inches).The standard long side door is generally illustrated throughout this manual.
Paper Cutter
The paper cutter is a factory- or field-installable option designed to cut off continuous paper-based stock or liner between labels. The cut-off labels, tickets, or tags can be collected on an optional tray. The paper cutter can be controlled using the instructions CUT, CUT ON, and CUT OFF in Intermec Fingerprint and the Intermec Direct Protocol. Also see Chapter 4, ”Media Load, Cut-Off.”
Integral Liner Takeup Unit
The integral liner takeup unit is an optional device for peel-off (self-strip) operation, which means the labels are separated from a liner (back-
ing paper) after printing and the liner is wound up on an internal hub. The unit also includes a guide shaft. Peel-off cannot be combined with Quick-Load guides, see below.
Media Supply Hub
The rotating media supply hub is designed to fit media roll cores with an internal diameter of 38-40 mm (1.5 inch). The hub can be fitted in the same positions as the supply roll post, see Chapter 2. Being factory installed, the position of the media supply hub is not intended to be changed by the operator.
3-inch Adapter
The 3-inch/76 mm adapter is used with a rotating media supply hub and makes it possible to use media rolls with 3 inch/76 mm inner diameter cores. The adapter is pressed onto the hub and secured by a screw. Not used with a media supply roll post.
Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) | 87 |
