Intermec PF4I Tear-O with Quick-Load (Straight-through)

26 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)
Chapter 4—Media Load
Tear-Off with Quick-Load (Straight-through)
In addition to the media load procedure for tear-off (straight-through)
operation described earlier in this chapter, the EasyCoder PF4i Compact
Industrial can optionally be fi tted with a set of Quick-Load guides that
makes media load much easier and quicker.
The printer is normally delivered with two different sets of Quick-Load
guides: wide and narrow. The wide type generally guides the media
better, but the media must be at least 80 mm (3.15 inches) wide. The
narrow type allows a media width as narrow as 40 mm (1.57 inches), but
it may be less suited for wide and thin media.
Quick-Load cannot be combined with peel-off (self-strip) operation.
An optional label taken sensor can hold the printing of the next copy
in the batch until the present copy has been removed, see Chapter 9,
“Options.”
Use the <Feed> key (see fi gure #5) when loading the same type of media.
When switching to a new type of media, or if the printer does not feed
out the media properly, simultaneously press the <Shift> and <Feed>
keys to perform a “testfeed.” Fully automatic loading, without the opera-
tor having to press any key, requires a special set of Intermec Fingerprint
instructions in the application program.