Intermec PF4I Self-Adhesive Labels, ⇒ Label Width excluding liner, ⇒ Label Length, ⇒ Label Gap

Appendix B—Media Specifications

Self-Adhesive Labels

⇐a ⇒ Media Width (including liner)

Maximum:	114.3 mm	(4.50 inches)
Minimum (standard):	25.0 mm	(1.00 inches)
Min. (narrow Quick-Load):	40.0 mm	(1.57 inches)
Min. (wide Quick-Load):	80.0 mm	(3.15 inches)

⇐b ⇒ Liner

The backing paper must not extend more than a total of 1.6 mm (0.06 inches) outside the labels and should protrude equally on both side. Rec- ommended minimum transparency: 40% (DIN 53147).

⇐c ⇒ Label Width (excluding liner)

Maximum:	112.7 mm	(2.30 inches)
Minimum:	23.8 mm	(0.94 inches)

⇐d ⇒ Label Length

Maximum:	depends on SDRAM size
Minimum:	8.0 mm (0.32 inches)

Under ideal circumstances, a minimum label length of 4 mm (0.16 inches) could be used. It requires the sum of the label length (d) and the label gap (e) to be larger than 7 mm (0.28 inches), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short labels will work, but it is up to the user to test this in his unique application.

⇐e ⇒ Label Gap

Maximum:	21.3 mm (0.83 inches)
Recommended:	3.0 mm	(0.12 inches)
Minimum:	1.2 mm	(0.05 inches)

The Label Stop Sensor must be able to detect the extreme front edges of the labels. It can be moved between 5 fixed positions (see Chapter 12).

Media Type Setup

• Label (w gaps)

124 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)