Intermec PF4I manual Other Facilities, Reboot restarting the printer

Chapter 8—Intermec Shell Startup Program

Other Facilities

•Setup Mode (manual setup from printer’s keyboard)

•Print Setup (printing setup on label)

•Testfeed (formfeeds and auto-adjust of the LSS)

•Test Label (printing of test labels)

•Default setup (resetting all setup parameters to default)

•Software Update (downloading data from a host to a CompactFlash card in the printer, upgrading the printer’s firmware from a Compact- Flash card, or upgrading the printer’s firmware from a file in a PC)

•Reboot (restarting the printer)

Note: Intermec Shell is factory-installed in the printer’s per- manent memory (device "/rom"). If you insert a memory card with another startup file before you switch on the printer, or if there is a startup file stored in the printer’s permanent memory (device "/c"), this startup file will be used instead of Intermec Shell (see Chapter 3, “Startup Files”).

Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 77