Intermec PF4I manual Setup Mode Media, Ribbon Factor

Chapter 7—Setup Mode

Setup Mode; Media

(Intermec Fingerprint v8.20)

Continued from the previous page

SETUP: MEDIA

Continued on the next page

MEDIA:			MEDIA:
MEDIA SIZE			MEDIA TYPE
MEDIA SIZE:	MEDIA SIZE:	MEDIA SIZE:	MEDIA TYPE:
XSTART	WIDTH	LENGTH	LABEL (w GAPS)
			TICKET (w MARK)
XSTART:	WIDTH:	LENGTH:	TICKET (w GAPS)
			FIX LENGTH STRIP
[24]:	[832]:	[1200]:
			VAR LENGTH STRIP
			Scroll forward
			Scroll back

MEDIA:

PAPER TYPE

Not displayed if a transfer	PAPER TYPE:
	TRANSFER
ribbon mechanism is
not installed in the
printer.	TRANSFER:	TRANSFER:
	RIBBON CONSTANT	RIBBON FACTOR
	RIBBON CONSTANT:	RIBBON FACTOR:
	[90]:	[25]:

TRANSFER: LABEL OFFSET

LABEL OFFSET: [0]:

TRANSFER: RIBBON SENSOR

RIBBON SENSOR: [14]:

TRANSFER: LOW DIAMETER

LOW DIAMETER: [0]:

PAPER TYPE: DIRECT THERMAL

DIRECT THERMAL: LABEL CONSTANT

LABEL CONSTANT [85]:

DIRECT THERMAL:

LABEL FACTOR

LABEL FACTOR: [40]:

MEDIA:							MEDIA:
CONTRAST							TEST FEED
CONTRAST:							TEST FEED:
	+0%						[26		28	0	10]
	+2%							Press <Enter> to per-
		+4%						form a testfeed.
		+6%						Values are read-only.
			+8%
			+10%
				-10%
				-8%
					-6%
					-4%
					-2%
						Scroll forward
						Scroll back

Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 69