Intermec PF4I manual Entering Setup Mode at Installation

Chapter 7—Setup Mode

Entering Setup Mode at Installation

The method of entering the Setup Mode depends on which startup files are stored in the printer’s memory, a subject that was more thoroughly discussed in Chapter 3, “Starting Up.”

EasyCoder PF4i Compact Industrial with Intermec Shell

•Switch on the power.

•When the display shows the message “Enter=Shell; x sec...”, press <Enter>.

•Press <Setup> (this facility can be used anywhere within Intermec Shell).

•Set up the printer as described in this chapter.

•Return to Intermec Shell by pressing <Setup>.

EasyCoder PF4i Compact Industrial with a custom-made application program

•Normally, there is no need to enter the Setup Mode for custom-made application programs. Necessary provisions for changing the setup, manually or automatically, should be provided by the program.

64 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)