Vector PWA-14S, PWA-14W instruction sheet PJF2-1 not included PRS-1 not shown

Thread projector mount onto threaded rod adapter (G) as shown. Note: Make sure the notch in threaded rod adapter (G) is aligned with one of the four holes at the top of the PJF2-1.

Note: Installation of PRS-1 not shown. Please refer to PRS model instructions to attach PRS mount to PWA-14.

G

PJF2-1 (not included)

PRS-1 (not shown)

Secure PJF2-1 to threaded rod adapter (G) with one #10-32 x 3/8 socket pin screw provided with PJF2-1

Note: Installation PRS-1 not shown. Please refer to PRS model instructions to attach PRS mount to PWA-14.

#10-32 x 3/8 socket pin screw

Refer to PJF2-1 or PRS-1 model instructions for attachment of projector.

6 of 6	ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07
Visit the Peerless Web Site at www.peerlessmounts.com	For customer service call 1-800-729-0307 or 708-865-8870.

© 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.