Vector PWA-14W, PWA-14S instruction sheet Installation to a metal stud wall

Page 5

Installation to a metal stud wall

WARNING

Product must be mounted through drywall that has a minimum thickness of 1/2" and into metal studs, 26 gauge or heavier.

Drill 1/2" (13 mm) dia. holes through drywall and

 

stud. Insert togglers (call customer service to order

toggler

accessory kit ACC 415) as follows.

 

Important: Product must be mounted through

 

drywall that has a minimum thickness of 1/2" and

 

into metal studs, 26 gauge or heavier.

1/2"(13 mm)

Pivot end of toggler.

Push into hole.

Slide plastic cap forward while pulling back firmly on ring.

Snap off as shown.

A

1/4-20 x 2.5"

phillips screw

Attach wall arm with 1/4-20 phillips screws.

5 of 6

ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07

Visit the Peerless Web Site at www.peerlessmounts.com

For customer service call 1-800-729-0307 or 708-865-8870.

Image 5
Contents Turn to the Appropriate page for Your Installation Parts List Installation to a wood stud wall Illustration a Installation to a concrete wallInstallation to a metal stud wall PJF2-1 not included PRS-1 not shown