Perle Systems S-100-XXXXX manual Overview

Overview

This document contains instructions necessary for the installation and operation of the Perle Fast Ethernet Standalone Media Converters (S-100). These products convert a 100Base-TX cable connection (copper) to a 100Base-X connection (fiber). The fiber connection can be either single mode (SM) or multimode (MM) and can operate over different wavelengths and distances, depending on the model selected (see table below).

Model	Connector	Mode - Distance	Wavelength
S-100-M2xx2	SC/ST/LC	MM - 2 km/1.2 mi.	1310 nm
S-100-S2xx20	SC/ST/LC	SM - 20 km/12.4 mi.	1310 nm
S-100-S2xx40	SC/ST/LC	SM - 40 km/24.9 mi.	1310 nm
S-100-S2xx80	SC/ST/LC	SM - 80 km/49.7 mi.	1550 nm
S-100-S2xx120	SC/ST/LC	SM - 120 km/74.6 mi	1550 nm
S-100-S1SC20U	SC	SM - 20 km/12.4 mi.	1310/1550 nm
S-100-S1SC20D	SC	SM - 20 km/12.4 mi.	1550/1310 nm
S-100-S1SC40U	SC	SM - 40 km/24.9 mi.	1310/1550 nm
S-100-S1SC40D	SC	SM - 40 km/24.9 mi.	1550/1310 nm

Note: Please refer to Perle’s web site for the most up to date Installation guides, models and specifications:

http://www.perle.com/

Fast Ethernet Media Converter – Installation Guide 2