DIP Switches
The DIP switches are accessible through the opening in the side of the enclosure
Note: All switch changes take effect immediately and will result in a link reset on both ports.
DIP Switch Settings
Auto Negotiation (Switch 1)
Switch Position | Mode |
|
|
Up (default) | Auto |
|
|
Down | Off |
|
|
Auto: In this mode of operation the media converter will negotiate Ethernet parameters on the copper connection. This will ensure the most optimal connection parameters will be in effect. If the copper link partner does not support Auto negotiation, the
Off: Auto Negotiation should only be turned off, if the copper link partner does not support Auto Negotiation.
When the Auto Negotiation switch is set to the OFF position, the media converter will operate at 100 Mbps and Full Duplex mode.
Fast Ethernet Media Converter – Installation Guide 4