Palsonic DVD3000 Remote control preparation, DVD play, Remote control unit operating range

C

electrolyte may leak which may lead not only to malfunctioning but also to rust if contacting with the electrolyte.

• Wipe away any electrolyte leaking inside the remote control unit, and install new batteries. • If any electrolyte should come into contact with parts of your skin, wash it off thoroughly with water.

Remote control unit operating range

Point the remote control unit no more than 7m from the remote control sensor and about 60 of the front of the unit.

AMPLIFIER	CENTER AUDIO
FRONT AUDIO(L)	FRONT AUDIO(R)

SURROUND AUDIO(L) SURROUND AUDIO(R)

SUBWOOFER AUDIO

• Remote control preparation

Battery installation:

Insert the batteries while observing the correct

(+)and (-) polarities as illustrated below. Service life of batteries:

•The batteries depend on how often and for what operations the remote control unit is used.

• If the remote control unit fails to work even when it is operated near the player, replace the batteries.

• Use batteries size #7 Notes:

• Do not use rechargeable (Ni- Cd ) batteries.

• Do not attempt to recharge or short-circuit the batteries.

• Do not drop, step on or impact the remote control unit. Otherwise this may damage the parts or lead to malfunction.

•Do not mix old and new batteries.

•If the remote control unit is not going to be used for a long time, remove the batteries. Otherwise,

Notes:

•Do not point bright lights at the remote control signal sensor.

•Do not place objects between the remote control unit and the remote control signal sensor.

•Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.

• DVD play

Preparation:

•Switch on the TV set’s power and select “AV” as

11