Palsonic DVD3000 user manual VCD play, Confirm/play, Fast forward Fast reverse or

Note:

(1) When connecting 5. lch, center speaker, rear speaker and subwoofer speaker is in on status.

(2)For changeable of software, there may appear some menu display different from exact function above, but it is not affect function of the player.

SET UP

1.Press "SET UP" in the STOP mode. The TV monitor may display an image such as the main page shown above. The image may differ depending on the software versions adopted.

2.Press " key to select the item shown in the main setting page. When the item is decided, press " " and " " key to select the function.

3.Press the " " (confirm/play) key to confirm the selected unction, then press " " key.

4.Press "SETUP" key when ending the set up.

Note:

1 .The main functions of every item are listed in the tables for your reference.

2.We suggest that the user should not enter the setting procedure soon unless the user get quite familiar with the player because the general function could be selected through the remote control unit and the wrong setting may cause unwanted output fail for audio or video signal.

3.The Password is 3308

*Default selection in the factory.

Whenever the setting is finished, the player will enter into the same status while powering up (especially for DVD). The settings will be remembered in the memory even the player is switched off unless you change the setting purposely.

Note:Texts on menu may be different for the version changed, we will not inform in addition.

• VCD play

Confirm/play

A: Switch on the "POWER" button in the front panel of the unit.

The initiating image will be displayed on the TV monitor and the self-test procedure for the player will be going on. If there is no disc in the player disc tray, “no disc” will be displayed in the front panel display.

B: Place a disc onto the tray.

Press the "OPEN/CLOSE" button to open the tray, place the disc onto its position, then press the "OPEN/CLOSE" button again to close the tray.

C:Press the " " (confirm/play) key to commence the play. Another initiating image will be displayed in the TV monitor after a while.

D:Press the "PAUSE" button to stop the play temporally , press the key again to resume the play.

E:Press the "STOP" key to stop playing.

While playing the version 1.1 disc, pressing "STOP" key means stop the play.

While playing the version 2.0 disc, pressing "STOP" key has two meaning:

1.Return to high level menu in PBC ON status

2.Stop play in PBC OFF status.

Slow-motion play

Press the "SLOW-MOTION" key to enter the slow-motion status, press the key step in step, the player enter into the "slow-motion 1", "slow-motion 2", "slow-motion 3" status respectively, press "PLAY" key to resume normal play during the slow-motion playing.

Fast forward (Fast reverse) or

Press " " or " "key during playing, the play will advance or reverse at fast speed, press 'PLAY' key to

resume normal play whenever the wanted contents appear on the TV monitor. Press " " or " " key during playing, the image will advance or reverse at the speed in between of 2", 4", 6", 8" press the "PLAY" will resume normal play.

Note: the speed change mentioned above is approximate.

17