Palsonic DVD3000 Mode, Catalogue menu, Selecting by number, Skip or, PBC function, Repeat

Mode

Press "MODE" key to select play with left sound track, right sound track or stereo sound and so on. This mode satisfies to realize bilingual function.

Catalogue menu

This function is effective only in STOP status

Press the "MENU" key, then press the number key according to the needed function. There are four possible selections: 1.Browse. 2. Total disc. 3.Single program. 4.Exit

When the Browse function is selected, the monitor will show a full screen image lasted for five seconds for every title in turn, if you press number key or "PLAY" key, the normal play will be resumed.

When the Total disc function is selected, if there are two or more titles in the disc, the player will display a small picture lasted for five seconds in turn for every title, there will be nine small picture at the most, if the

total title number is more than 9, you can press then the small picture display will be continued from the tenth title.

When the Single program function is selected, the player will display the title selected in a form of nine

small pictures. Press or " key will enter into next title or return to last title. Press " " key will resume the normal play.

When the Exit function is selected, the player return to its initiating status.

Selecting by number

Press the direct select key "1-9" and "+10" to select the program number you wanted ( for example, if you want select the eighth program, you need only to press the number "8" the number 8 will be illuminated in the front panel display).

When the number you wanted is bigger than 10, you can select it in the way listed below: If you want select program 16, press "+10" key once then press "6" key.

If you want select program 21, press "+10" key two times then press " 1" key.

Skip " " or " "

PBC OFF status.

Press the " " key during play, return to the higher level menu or the last chapter.

Press the " " key during play. enter to the lower level menu or the next chapter.

PBC function

Press PBC key to control the play mode with different disc versions.

With version 2.0 VCD discs, when the numbers to be selected appear on the monitor screen, the play will pause automatically in accordance with the control command to wait for user’s select through the number key in remote control unit. In PBC OFF status, the function mentioned above fails to work, the player consider the version 2.0 disc as version 1.1 and enter into STOP status. There is no such control functions for version 1.1 disc, so the PBC function does not work and the play will go on automatically.

Because most users need only to enjoy the discs simply, We suggest to play the unit in PBC OFF status to let the player work sequentially.

Repeat

PBC OFF status

Press "repeat" key during play to repeat play the title being played

Press "repeat" key again to repeat play the whole disc being played

Press "repeat" key once more, cancel repeat and resume normal play.

A-B

Repeat sections between two specific points (A-B repeat)

Press "A-B" key during play at the point where repeat play is to commence (A).

Press "A-B" again at the point where repeat play is to be concluded (B).

Repeat play of the selection between points A and B starts.

Press "A-B" key again to cancel the repeat function.

18