Basic Operation
Basic Playback
Preparation before playing:
1.Connect your DVD player to the TV set and amplifier.
2.Turn on the TV set, and select the AV input to the channel you have connected.
3.Turn down the amplifier volume and turn on the power of amplifier, then select the Audio input to the channel you have connected.
After the preparation, you use the DVD player and enjoy the program as following:
1.Firstly, press the power switch, the player will start to work. Then "LOAD" is illumi-
nated on the VFD and the logo is displayed on TV screen
2.Secondly, press OPEN/CLOSE button either on front panel or re- mote controller. The player displays "open" on the VFD. When the tray is open, please put the disc on the tray, which letter side of disc should be up.
3. Thirdly, press PLAY but- ton either on the front panel or remote controller, and the tray closes. The player will automatically read and identify the disc. Then the player will display the type and total time of the disc on the VFD, and begin to play.