Manual Search, Vhfl Vhfh UHF | Palsonic 9219SF instruction

3. MANUAL SEARCH

Press the

button

to select MANUAL

If AUTO-SEARCH cannot preset the desired channels,

or you want to preset the desired channels one by

one with the preferred channel numbers - please make

use of MANUAL SEARCH.

MANUAL SEARCH

3.1 Press the menu item select button or to select

AUTO SEARCH

MANUAL SEARCH (the caption on the screen are

Press the

button

red).

to display the menu of

3.2 Press the

button to enter into the sub-menu

MANUAL SEARCH

of MANUAL SEARCH.

MANUAL SEARCH

3.3 Press the

button to choose POSITION.

(the caption on the screen are red) , press the

button to select the needed program number (from

00 ~ 99.

Press the

button

Note: Push the

button to select a channel number

to select SEARCH

within 0.7 of a second. Push and hold the

MANUAL SEARCH

button for more than 0.7 of a second to select a

decimal number.

3.4 Press the

button to select SEARCH, push

the

button to search channels from current channel

Press the

button to

to higher channel. Push the

button to search

select the wanted channel

channels from current channel to lower channel.

number

When a channel is located, the searching stops, this

channel is then memorised with a present channel

number.

POSITION

Note: You can also make use of band selection to quicken

the searching process in your desired band. Pressing

Press the

button

the

button moves the band to the next step

select SEARCH

in the sequence below.

VHFL

VHFH

UHF

Press the button

When a station is searched

it begins searching

the searching stops

POSITION 22 SEARCH