Palsonic 9219SF owner manual

Page 4

NOTES FOR OPERATION

*Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.

*Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set.

Cautions For Safety

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power supply of the other type.

When an unusual situation occurs, turn off the power switch at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.

Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. Never use it in a bathroom.

There exists High Voltage in this TV set. Do not remove the cover to avoid danger.

When the TV set is to be left unattended, please turn off the power switch and remove the plug from the wall outlet.

In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth.

The TV set should be placed on an adequate place without exposing it to direct sunlight and other sources of heat to prevent the deformation of the cabinet or damage to components.

Do not cover the Ventilating holes in the cabinet. Keep a space of more than 5 cm from the walls to the TV set, to guarantee the good ventilation.

When the power cord or the plug is damaged, please contact a qualified service department to get service.

2

Image 4
Contents 92CM Cordless Remote Colour Television Model 9219SF Contents Main features Page Installation and appearance Antenna connection Battery InstallationEffective range of the remote control Remove the back battery coverSpeaker Connection Front view AppearanceBack view Remote controller Switching on/off Special indicationTo enter into menu Presetting the channelsSearch Manual Search Vhfl Vhfh UHFManual Fine Tuning Skip unwanted program numbersSetting of colour and sound system Channel selectionMaking use of the CH button Making use of the buttonSound mode selection Stereo Force FMPicture and sound adjustment Picture adjustmentSound adjustment Bass TrebleAdjusting the volume and muting the sound Surround OFFOther functions On Timer/OFF TimerOFF Time OFF Timer Selecting the menu languageChinese LanguageExternal Equipment Connections To Connect to AV inputTV Video 1 Video 2 Video To connect Monitor output terminalsTroubleshooting Symptoms Check the following itemsPAL-D/K PAL-B/G PAL-I NTSC-M U/S SECAM-B/G SECAM-D/K CRTUHF Catv Australia 1300 657