Skip unwanted program numbers, Manual Fine Tuning

3.5When you want to store and memorise another channel with another position, repeat steps 3.3, 3,4.

4.Skip unwanted program numbers

After presetting the channels, you can skip unwanted program numbers to select your desired channels.

4.1Repeat steps 3.1 to 3.3 to select the unwanted program position of the unwanted channels .

4.2Press the or button to select SKIP. Press the

of button to select SKIP ON.

After completion of the channel presetting, when you

press the CH button to select channel, the unwanted channels will be skipped.

If you want to skip other unwanted channels, repeat step 4.1 above to change the channel numbers.

If you want to restore the skipped program numbers, do step 4. 1 to select these program numbers, then press the or button to select SKIP OFF.

5. Manual Fine Tuning

When sound and picture's effect of a channel is poor (for example: one or two CATV channel's sound and picture are not standard) , you can correct by the use of Manual Fine Tuning.

5.1Repeat steps 3. 1 to 3.3 to select the channels you want to manually fine tune.

5.2Push the or button to select MFT, then press

or button, the channel begins to search until the optimum picture and sound is achieved.

Note: If some channel's colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do the following step 6 to set the colour and sound system.

After finishing the preset operation, press the MENU button repeatedly until the "on - screen" display disappears and exits from the main menu.

MANUAL SEARCH

POSITION 14