Palsonic TFTV680 Basic Operation, Changing Channels, Adjusting the Volume, Muting the Sound

Basic Operation

Changing Channels

Using the Channel Buttons (CH or CH )

Press the CH or CH to change channels.

When you press the CH or CH , the unit changes channels in sequence. You will see all the channels that the unit has memorised.

You will not see channels that were skipped.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel:

Input the channel number by using the 0-9 number buttons directly.

To select a two-digit channel:

Press -/-- to display "- -" and input the channel number by using the 0-9 number buttons.

To select a three-digit channel:

Press -/-- to display "- - -"and input the channel number by using the 0-9 number buttons.

Note:

When you use the number buttons, You may directly select channels that were skipped.

Using the RETURN button

Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL- and VOL+)

Press the VOL+ or VOL- to increase or decrease the volume.

Muting the Sound

Using the MUTE button

At any time, you can temporarily turn off the sound using the MUTE button.

1	Press the MUTE button and the sound turns off.
2	To turn mute off, press the MUTE button again.

Select input source signal

1 Press SOURCE to access source select menu.

2 Press CH to select a desired signal source.

You may directly press the relevant number button to select a desired signal source.

3 Press ENTER to confirm.

TV ------------------	select TV signal.
Video --------------	select signal from Video terminal.
S-Video -----------	select signal from S-Video terminal.
SCART1 ----------	select signal from 21-PIN SCART 1 interface.
SCART2 AV -----	select signal from 21-PIN SCART 2 interface.
SCART2 Y/C ----	no function.
YPbPr -------------	select signal from YPbPR or YCbCr terminals.
D-Sub -------------	select signal from D-Sub (15-pin D-sub) terminals.
DVI -----------------	select signal from DVI terminals.

Select Main Source

1.TV

2.Video

3.S-Video

4.SCART 1

5.SCART 2 AV

6.SCART 2 Y/C

7.YPbPr

8.D-Sub

9.DVI

Note:

You may quickly switch from other inputs to TV program by pressing the number buttons or CH.

18