Palsonic TFTV680 Setting Picture, Using the Preset Picture Mode, Customising the Picture

Setting Picture

Using the Preset Picture Mode

1 Press MENU to display the menu main page.

The [Video] menu page will be highlighted automatically.

Video Audio Screen Program Option

2

3

4

5

Press CH to select Mode item.		1.	Mode:	Standard			Vivid
		2. Contrast				50	Standard
Press VOL+ or ENTER to access the sub-menu.		3.	Brightness		50		Mild
		4. Color			50		Custom
		5.	Hue			00
Press CH	to select a desired picture mode.	6.	Sharpness		50
		7. DNR		AUTO

Press ENTER to confirm and press MENU repeatedly to exit.

There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom]. Each preset mode has its own picture settings.

[Vivid]: Select for a bright picture.

[Standard]: Select for a normal picture.

[Mild]: Select for a fine/soft picture.

You may directly use the P.M button on the remote control to select a desired picture mode.

Customising the Picture

1	Press MENU to display the menu main page.
	The [Video] menu page will be selected automatically.
2	Press CH to enter the menu and select item with CH or CH .

3 Press VOL+/- to adjust the value of the item. 4 Press MENU to exit.

Video		Audio	Screen Program Option
1.	Mode:		Standard
2.	Contrast		40
3.	Brightness		60
4.	Color		50
5.	Hue		00
6.	Sharpness		50
7. DNR			AUTO

Adjustment item	Press VOL-	Value range	Press VOL+
Contrast	Decrease contrast	0 - 100	Increase contrast
Brightness	Less bright	0 - 100	More bright
Colour	Lower colour intensity	0 -100	Higher colour intensity
Hue *	Towards purple	-50 - +50	Towards green
Sharpness	Soft picture	0 - 100	Sharp picture

* The [Hue] item is for NTSC only

Reducing Picture Noise

1 Press MENU to display the menu main page.

The [Video] menu page will be selected automatically.

Video Audio Screen Program Option

2

3

4

5

Press CH repeatedly to select the DNR item.		1.	Mode:	Standard
		2. Contrast				40
		3.	Brightness		60
Press VOL+ or ENTER to access the sub-menu.		4.	Color		50
		5.	Hue			00
Press CH	to select.	6.	Sharpness		50
		7. DNR		AUTO

Press ENTER to confirm and press MENU repeatedly to exit.

Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance the picture quality by reducing the noise.

Weak

Medium

Strong

Auto

Freezing picture

Press the FREEZE button to hold on the image on the screen (the video sources still run). Press again to reactivate the image.

Note:

For the sake of protecting the screen, please do NOT freeze a picture for a long time.

19