Palsonic TFTV680 owner manual Troubleshooting, Symptoms Check item

Page 32

Troubleshooting

Before calling for repair service, check the following items for possible remedies to an encountered symptom.

Symptoms

Check item

 

 

"Ghost" or double images

This may be caused by obstruction to the antenna due to high rise buildings

 

or hills. Using a highly directional antenna may improve the picture.

 

 

No power

Check that the AC power cord is plugged into the mains socket.

 

 

Unplug the power cord, wait for 60 seconds. Then reinsert plug into

 

the mains socket and turn on the unit again.

 

 

No picture

Check antenna connections at the rear of the unit to see if it is properly

 

connected to the unit.

 

Possible broadcast station trouble. Try another channel.

 

Adjust the contrast and brightness settings.

 

Select a correct input.

 

Is a non-compatible signal being input?

 

 

Good picture but no sound

Increase the VOLUME.

 

Check that the unit is not muted.

 

Check Whether the sound is output to headphone.

 

 

Good sound but poor colour

Adjust the contrast, colour and brightness settings.

 

 

Poor picture

Sometimes, poor picture quality occurs when having activated an S-VHS

 

camera or camcorder connected and having connected another peripheral

 

at the same time. In this case, switch off one of the other peripherals.

 

Check whether the room is too bright.

 

 

Horizontal dotted line

This may be caused by electrical interference (e.g. hair dryer, nearby

 

neon lights, etc.)

 

Turn off the equipment.

 

 

Television not responding to

Check whether the batteries are working. Replace if necessary.

remote control

Clean the remote control sensor lens on the unit.

 

Do not use the remote control under strong or fluorescent lighting.

 

The batteries should be inserted with polarity (+, -) aligned.

 

 

Snowy picture and noise

Check the antenna connection.

 

 

No stable or not

Check if you have selected the correct D-Sub mode in your PC.

synchronised D-Sub picture

 

No output from one of the speakers

Adjust Balance in the audio menu.

 

 

Note:

If your problem is not solved, restart your TV by turning it off and then on again once.

Never attempt to repair a defective TV yourself.

29

Image 32
Contents N111 Table of Contents Table of Contents Important Safety Precautions Important Safety Precautions Using the Remote Control Batteries for the Remote ControlPrecautions on battery use PreparationsPower Connection Antenna ConnectionPower Identification of ControlsMain Unit VOL+Hdtv inputs Y, Pb/Cb, Pr/Cr, Audio L/MONO, R Antenna inputDVI input / Audio Remote Control MenuIdentifications of Controls PIP-POSHow to connect ConnectionsConnect a VCR To play VCRTo view signal from AV/S-VIDEO inputs Connect AVI or S-Video InputsExamples of external devices that can be connected Home video game system Video CameraTo play DVD Connect a DVD PlayerDVD player Connect a DTV receiver To Watch DTVConnect a PC To Watch the PC screenViewing the Menus and Displays Turning the Unit On and OffTurning the Unit On and Off Manual Fine Tuning Viewing TV ProgramsSelect a Region Storing Channels in Memory AutomaticallyEditing Channels Manual SearchSkipping Channel Setting Favorite Channel Editing Program NameSetting Locking Function On or Off Changing PasswordRestart the unit to active your setting Locking TV ChannelsAdjusting the Volume Select input source signalBasic Operation Changing ChannelsSetting Picture Using the Preset Picture ModeCustomising the Picture Reducing Picture NoiseSetting Sound Adjusting the Sound BalanceAdjusting the Headphone Volume Adjusting EqualizerSetting SRS effect Stereo/Bilingual SelectionNicam Broadcast Selection IGR German stereo system BroadcastsSetting System Setting Colour SystemSetting Sound System Changing Screen Aspect RatioSystem Setting Setting Menu BackgroundSetting Blue Screen Setting Sleep TimerChanging Screen Layout Selecting Screen LayoutPress CH to select Off, POP, 6 Windows or 9 Windows POP Picture-out-PictureUsing the PIP-POS button Using the Active-WIN buttonSwap the Contents of the PIP Image and Main Image PIP OperationsAdjustment in D-Sub/DVI Mode Adjusting Image Horizontal SizeAdjusting the Screen Automatically Changing the Position of ImageLoading Default Values Advanced Adjustment for Image PositionSmoothing the Picture To select H Position or V Position itemTeletext CH or CHVOL+ or VOL Colour RED/GREEN/YELLOW/BLUETroubleshooting Symptoms Check itemSpecifications TFT-LCDAccessories Supported Display FormatTEL 02 9313